Our American Prairie products come standard with their original patina surface, no man-made finish or sealant. Prior to being salvaged, this material lived a previous life outdoors and exposed to the elements. The weathering and UV enhancement that has given these products their patina and character has also toughened up the wood and removed the softest, most rot prone fiber. Site applied sealers can provide additional protection to this material but is not required–and may affect the overall look of the product. Our shiplap profile material can be installed either vertically or horizontally. (Make sure that the back tab is going up when installing horizontally.) We recommend that some space is left between the boards to allow for natural expansion and contraction.
STARTER STRIP INSTALLATION
- We discuss the benefits and drawbacks of metal siding in terms of cost, maintenance, curb appeal, durability and more.
- Champion takes full responsibility for your siding installation, from start to finish.
- Using non-corrosive materials, install flashing around all doors, windows, rakeboards, chimneys, and other needed areas.
- When installing siding, take your time and be careful not to miss any step.
- Expect to pay $300–$1,200 per square for standard vinyl siding, including materials and basic installation.
- Every 8” and to every available stud with the fastener penetrating the substrate at least 1”.
- Not only does this make installation easier, but it also enhances insulation for your home.
Overlapping sections of siding by greater amounts than recommended will limit the siding’s movement as it expands, causing a wavy appearance. Your contractor might even find out that the sheathing underneath the old siding has deteriorated. If the sheathing is damaged or unusable for any reason, it will need to be replaced before new siding can be installed. Before the replacement siding can be installed, the old siding must be removed. It will likely cause a temporary mess in your yard; however, a professional contractor will have a plan for removal. While the size of your home is significant in any project, it is a key factor in your siding.
Powered circular saws using a blade that’s mounted backward are known to provide the cleanest and easiest cuts for vinyl siding. A 3-1/2” starter strip will cover enough foundation for adequate protection against the elements. You might be tempted to buy thinner strips at the hardware store because they’re more affordable, but we wouldn’t recommend that. The thinner the starter strip, the less protective the siding will be. We see a lot of people installing their wood siding all the way to the ground.
🪛 Soffit Installation:
This style can make a house appear taller, and homeowners use it for contemporary or farmhouse-style homes. It’s also popular for accent walls or to create visual interest when combined with horizontal siding. Vertical siding offers a fresh and distinctive look, making it ideal for homeowners seeking something unique. In general, the best time to install siding is during mild weather conditions, such as in the spring or fall. Avoid installing siding during extreme weather conditions, such as heavy rain or strong winds, as this can compromise the quality of the installation. The average cost of a siding installation on a median-sized home in Michigan is between $8,250 and $41,250.
Western Red Cedar Siding General Installation
New siding materials are likely to be delivered the day prior to the start of installation. Vinyl siding requires little if any maintenance, never needs to be painted, and if damaged can be easily replaced. To maintain a fresh appearance, vinyl siding should be washed at least once a year. Elevate your home’s curb appeal and express your style with our wide range of custom home siding options.
We Use the Best Materials
Adequate Clearance – There should be a sufficient gap between the siding and adjacent surfaces, such as roofing, windows, and the ground. For example, siding should not be in direct contact with the soil, as this can lead to moisture damage and pest infestations. Make sure the siding has the versatility to meet the varied needs of your specific project. Ply Gem Mastic’s EverPlank luxury vinyl siding is a low-maintenance siding solution that’ll last for decades. Ply Gem is the most-popular vinyl siding manufacturer in North America— and for good reason! They’ve been a leading innovator of siding technology for 75 years and offer a V.I.P. limited lifetime warranty.
Maintenance and Care for Vinyl Siding
The toughness of fiber cement siding calls for tougher tools. The cutting of fiber cement boards for corners and proper lengths requires tougher saws and tools than siding made of vinyl or wood. Initiating the process with starter strips and flashing is a primary step in vinyl siding installation. Ensuring a solid foundation will help guarantee a smooth and long-lasting installation that protects your home from the elements. Vinyl siding is relatively easy to install, but it does require skill. It’s best to hire a professional who has the tools and experience required to execute the project effectively.
Siding Installation Tips
In colonial North America, Eastern white pine was the most common material. Wood siding can also be made of naturally rot-resistant woods such as redwood or cedar. After the installation is complete, our crew will clean up the installation site and haul away all job-related debris. We will do a walkthrough with you, to assure your complete satisfaction. Trespa Pura NFC® Sidings are a versatile solution for most cladding projects because they offer maximum design freedom and a long lasting, beautiful finish.
How to Install Siding in 4 Easy Steps
- To install vinyl siding, start by nailing J-channel pieces under the fascia, followed by installing soffit pieces and the starter strip.
- A smooth, level wall surface is necessary for the accurate installation of vinyl siding.
- There will be 11 panels in each box, which will cover 100 square feet of your exterior walls.
- Now for the best part of the installation process — installing your steel log siding!
- Before slapping on those fresh panels, show some love to your walls.
- As for permanent utility equipment, you’ll simply have to work around it.
Flash all openings, penetrations and other areas where water will collect or travel. Panel siding should be planned so joints hit studs and avoid narrow pieces at the ends of walls. Also, with vertical siding, most of the expansion is downward, so if you install the siding yourself, leave more space at the lower end for expansion.
Factors Affecting Vinyl Siding Quality
Installing finishing trim elevates the look to another level of professionalism and ensures those edges are sealed against the elements. Real log homes have staggered seams because settlers took whatever logs they could find in the forest, cut them down, and pieced them together. To give your home that same authentic look, you can stagger the seams of TruLog™ to make this steel siding look just like wood. You can see an example of how to stagger the seams at the beginning of the video below. In this instance, we choose to start our second panel at 4-foot so the seam is staggered from our first panel. You can cut the siding with a steel-toothed, non-abrasive saw blade or steel snips.
- Join us as we share the four common vinyl siding installation topics that Jan often addresses with dealers and installers.
- Walls that are internally framed, whether with wood, or steel I-beams, however, must always be sided.
- The installation process will continue with new fascia and soffit.
- Make sure your contractor has a good reputation and the experience to get the job done.
- At Norandex, we understand the challenges professionals face, from selecting the best materials to managing complex installations.
exterior home siding
If needed, repairs are made to safeguard your home’s structural integrity. The installation team will pull away old boards, stucco, etc., to make room for your new siding. Debris may be temporarily placed on your lawn during the process, but we’ll clear it all away once the work is completed. Each of the sidings we install are protected by a limited lifetime manufacturer’s warranty. Should any part of your siding become damaged or defective after we install it, you will be protected by the brand’s warranty.
This article will give you step-by-step instructions to easily install vinyl siding on your home and achieve a professional finish. Installing vinyl siding is a big project, but it is accessible to people who have basic carpentry skills. And there’s Roofing near me a powerful cost incentive to handle an installation yourself.
This barrier, combined with proper sheathing and insulation, will create a solid base for your vinyl siding installation. Are you ready to transform your home’s exterior with a flawless install vinyl siding project? Vinyl siding is an economical choice, requiring minimal maintenance and offering a beautiful aesthetic. In this comprehensive guide, you’ll learn step-by-step techniques to master the art of install vinyl siding, ensuring a polished and professional look for your home.
If the panels are installed horizontally, then it will require foam closure strips. As long as you’ve done your due diligence with research and preparation, your vinyl siding installation should sail smoothly. You should end up with a flawless finish with the insider tips in this guide. Now, if you think you’re way over your head and are looking for professional help, don’t hesitate to get in touch with Heritage Exteriors today. Our team is ready to answer all your questions and offer you a free estimate for any of our services.
Once you feel it is locked into place, you can secure it to the wall on one end and start inserting the foam on the other end by pulling back the panel and dropping it into place. A nice feature here is that you can slide the foam down the line of the panel. After you have all the foam in place, secure the rest of the panel by screwing or nailing it to the studs of the wall and in between. Before you start working with siding panels, you’ll install a variety of accessories, including starter strips, corner pieces, flashing, J-channels, etc. Installing fiber cement siding is similar to other siding projects but may take a bit of extra work on the part of your contractor. Like other types of siding, fiber cement is installed against a protective layer and nailed into the studs.
How Vinyl Siding Changes in Cold Temperatures
Thatch is an ancient and very widespread building material used on roofs and walls. Thatch siding is made with dry vegetation such as longstraw, water reeds, or combed wheat reed. The materials are overlapped and weaved in patterns designed to deflect and direct water. On installation day, you can expect to be greeted by our friendly installation experts who will review the process ahead.
If your home has shutters, you’ll need to pre-drill holes in the shutters to attach them to the siding. Then drill holes in the siding where you’ll screw the shutters on. You want to holes in your siding to be a quarter-inch in diameter bigger than the screw.
While ½” might not seem like much, the truth is that it makes a big difference when it comes to vinyl siding installations in the winter. Vinyl siding expands and contracts in reaction to temperature, so vinyl siding installers will need to cut the panels as necessary to work with growth and shrinkage. Since plastic siding is a manufactured product, it may come in unlimited color choices and styles.
